Volkswagen DTC P1408 – EGR Temperature Sensor Signal Too High
DTC P1408 meaning on Volkswagen
The Diagnostic Trouble Code (DTC) P1408 for Volkswagen indicates that the EGR (Exhaust Gas Recirculation) temperature sensor signal is too high. The EGR system is responsible for recirculating a portion of the exhaust gases back into the engine intake to reduce emissions. The temperature sensor monitors the temperature of the exhaust gases in the EGR system.
Volkswagen DTC P1408 symptoms
Symptoms of DTC P1408 on a Volkswagen may include:
- Check Engine Light illuminated on the dashboard
- Decreased engine performance or rough idling
- In some cases, the vehicle may go into a limp mode
Volkswagen DTC P1408 causes
The common causes of DTC P1408 on a Volkswagen include:
- Malfunctioning EGR temperature sensor
- Wiring or connector issues in the EGR temperature sensor circuit
- Carbon buildup in the EGR system affecting sensor readings
Volkswagen DTC P1408 seriousness
While DTC P1408 may not cause immediate drivability issues, it is important to address this code promptly to prevent potential damage to the engine or emissions system. Ignoring the issue can lead to increased emissions and reduced fuel efficiency.
How to diagnose DTC P1408 on Volkswagen
To diagnose DTC P1408 on a Volkswagen, you can follow these steps:
- Use an OBD-II scanner to retrieve the fault codes and verify the presence of P1408.
- Inspect the EGR temperature sensor and its wiring for any visible damage or corrosion.
- Check the EGR system for carbon buildup that may be affecting sensor readings.
- Perform a resistance test on the EGR temperature sensor to determine if it is within specifications.
How to fix DTC P1408 on Volkswagen
To fix DTC P1408 on a Volkswagen, you can try the following solutions:
- Replace the EGR temperature sensor if it is found to be faulty.
- Repair any damaged wiring or connectors in the EGR temperature sensor circuit.
- Clean the EGR system to remove any carbon buildup that may be affecting sensor readings.
- Clear the fault codes using an OBD-II scanner after making the necessary repairs.
How to erase DTC P1408 on Volkswagen
To erase DTC P1408 on a Volkswagen, you can use an OBD-II scanner to clear the fault codes stored in the vehicle’s ECU. After addressing the underlying issue causing the fault code, clearing the code will reset the Check Engine Light and monitor the system for any new faults.
Recommended tools for Volkswagen diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.