Volkswagen DTC P1407 – EGR Temperature Sensor Signal Too Low
DTC P1407 meaning on Volkswagen
The Diagnostic Trouble Code (DTC) P1407 for Volkswagen indicates that the EGR (Exhaust Gas Recirculation) temperature sensor signal is too low. The EGR system is responsible for recirculating a portion of the exhaust gases back into the engine intake to reduce emissions. The EGR temperature sensor monitors the temperature of the exhaust gases entering the EGR system.
Volkswagen DTC P1407 symptoms
Symptoms of a DTC P1407 on a Volkswagen may include:
- Check Engine Light (MIL) illuminated
- Decreased engine performance
- Increased fuel consumption
- Rough idling or stalling
Volkswagen DTC P1407 causes
The common causes of a DTC P1407 on a Volkswagen include:
- Defective EGR temperature sensor
- Wiring or connector issues in the EGR temperature sensor circuit
- Carbon buildup in the EGR system
- Faulty EGR valve
Volkswagen DTC P1407 seriousness
While a DTC P1407 may not cause immediate drivability issues, it can lead to increased emissions and reduced fuel efficiency. Ignoring this code can potentially cause long-term damage to the engine and emission control system.
How to diagnose DTC P1407 on Volkswagen
To diagnose a DTC P1407 on a Volkswagen, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the EGR temperature sensor and its wiring for any visible damage
- Test the EGR temperature sensor using a multimeter to check for proper resistance values
- Check the EGR valve operation and look for any carbon buildup in the EGR system
How to fix DTC P1407 on Volkswagen
To fix a DTC P1407 on a Volkswagen, the following steps may be taken:
- Replace the faulty EGR temperature sensor
- Repair any damaged wiring or connectors in the EGR temperature sensor circuit
- Clean out any carbon buildup in the EGR system
- If necessary, replace the EGR valve
How to erase DTC P1407 on Volkswagen
After the issue causing the DTC P1407 has been resolved, the code can be erased using a diagnostic scanner. This can typically be done by selecting the “Clear DTCs” or “Erase Codes” function on the scanner. Once the code is cleared, the Check Engine Light should turn off.
Recommended tools for Volkswagen diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.