Volkswagen DTC P1117 – O2S Sensor Heater Circuit Short To Ground Bank 1 Sensor 2
DTC P1117 meaning on Volkswagen
The Diagnostic Trouble Code (DTC) P1117 for Volkswagen indicates an issue with the O2S (Oxygen Sensor) Sensor Heater Circuit Short To Ground on Bank 1 Sensor 2. This means that there is a malfunction in the circuit that heats up the oxygen sensor located downstream of the catalytic converter on bank 1 of the engine.
Volkswagen DTC P1117 symptoms
Symptoms of DTC P1117 on a Volkswagen may include:
- Check Engine Light illuminated on the dashboard
- Decreased fuel efficiency
- Engine running rough or misfiring
- Increased emissions
Volkswagen DTC P1117 causes
Common causes of DTC P1117 on a Volkswagen include:
- Faulty O2S Sensor Heater Circuit
- Short to ground in the wiring of the sensor
- Corrosion or damage to the sensor connector
- Issues with the Engine Control Module (ECM)
Volkswagen DTC P1117 seriousness
While DTC P1117 may not cause immediate drivability issues, it is important to address this problem promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance and emissions control.
How to diagnose DTC P1117 on Volkswagen
To diagnose DTC P1117 on a Volkswagen, you can follow these steps:
- Use an OBD-II scanner to retrieve the fault code and verify the code P1117.
- Inspect the wiring and connector of the Bank 1 Sensor 2 oxygen sensor for any visible damage or corrosion.
- Check the resistance of the O2S sensor heater circuit to determine if there is a short to ground.
- Test the O2S sensor heater circuit for continuity and proper voltage supply.
- If necessary, perform a thorough inspection of the ECM and related components for any faults.
How to fix DTC P1117 on Volkswagen
To fix DTC P1117 on a Volkswagen, you can consider the following steps:
- Replace the Bank 1 Sensor 2 oxygen sensor if it is determined to be faulty.
- Repair any damaged wiring or connectors in the O2S sensor heater circuit.
- If there is a short to ground, locate and repair the short in the circuit.
- If the issue persists, diagnose and address any problems with the ECM or related components.
How to erase DTC P1117 on Volkswagen
To erase DTC P1117 on a Volkswagen, you can clear the fault code using an OBD-II scanner. After addressing the underlying issue causing the fault code, you can reset the Check Engine Light and clear the DTC from the vehicle’s memory. Ensure that the repair has been successful before clearing the code to prevent it from reoccurring.
Recommended tools for Volkswagen diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.