P1406 – Toyota DTC

Toyota DTC P1406 – Turbo Pressure Sensor Range/Performance Problem

DTC P1406 meaning on Toyota

DTC P1406 for Toyota indicates a Turbo Pressure Sensor Range/Performance Problem. This diagnostic trouble code is triggered when the Engine Control Module (ECM) detects that the signal from the turbo pressure sensor is outside the expected range or not performing as specified.

Toyota DTC P1406 symptoms

Symptoms of DTC P1406 on a Toyota may include:

• Check Engine Light illuminated
• Reduced engine power
• Poor acceleration
• Increased fuel consumption

Toyota DTC P1406 causes

Common causes of DTC P1406 on a Toyota include:

• Defective turbo pressure sensor
• Wiring or connector issues in the turbo pressure sensor circuit
• Intermittent sensor signal
• ECM software or hardware problems

Toyota DTC P1406 seriousness

DTC P1406 should not be ignored as it can lead to engine performance issues and potentially cause damage to the turbocharger system. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1406 on Toyota

To diagnose DTC P1406 on a Toyota, follow these steps:

1. Use a diagnostic scan tool to retrieve the trouble codes and freeze frame data.
2. Inspect the turbo pressure sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s voltage and resistance values according to the manufacturer’s specifications.
4. Perform a thorough inspection of the turbocharger system for any leaks or malfunctions.

How to fix DTC P1406 on Toyota

To fix DTC P1406 on a Toyota, consider the following:

1. Replace the turbo pressure sensor if it is found to be faulty.
2. Repair any damaged wiring or connectors in the sensor circuit.
3. Clear the trouble codes and perform a test drive to verify the repair.
4. If the issue persists, further diagnosis may be required to identify the root cause.

How to erase DTC P1406 on Toyota

To erase DTC P1406 on a Toyota:

1. Use a diagnostic scan tool to clear the trouble codes from the ECM memory.
2. Ensure that the underlying issue causing the DTC has been resolved before clearing the codes.
3. Perform a final check to confirm that the DTC P1406 has been successfully erased.

Recommended tools for Toyota diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.