P1699 – Subaru OBD-II 1996 & Newer models DTC

Subaru OBD-II 1996 & Newer models DTC P1699 – Engine torque control cut signal circuit high input

DTC P1699 meaning on Subaru OBD-II 1996 & Newer models

DTC P1699 on Subaru OBD-II 1996 & Newer models refers to the Engine Torque Control Cut Signal Circuit High Input. This diagnostic trouble code indicates that the engine control module (ECM) has detected a high input signal in the circuit responsible for controlling the engine torque.

Subaru OBD-II 1996 & Newer models DTC P1699 symptoms

Symptoms of DTC P1699 on Subaru OBD-II 1996 & Newer models may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Engine stalling or hesitation
• Difficulty accelerating

Subaru OBD-II 1996 & Newer models DTC P1699 causes

Possible causes of DTC P1699 on Subaru OBD-II 1996 & Newer models include:

• Faulty engine torque control cut signal circuit
• Short circuit or open circuit in the wiring harness
• Defective engine control module (ECM)
• Intermittent connection issues

Subaru OBD-II 1996 & Newer models DTC P1699 seriousness

DTC P1699 on Subaru OBD-II 1996 & Newer models should be addressed promptly as it can lead to engine performance issues and potential safety concerns. Ignoring this code may result in further damage to engine components.

How to diagnose DTC P1699 on Subaru OBD-II 1996 & Newer models

To diagnose DTC P1699 on Subaru OBD-II 1996 & Newer models, follow these steps:

1. Use an OBD-II scanner to retrieve the trouble codes stored in the ECM
2. Inspect the engine torque control cut signal circuit for any visible damage or loose connections
3. Check the wiring harness for continuity and shorts
4. Test the engine control module (ECM) for proper functionality

How to fix DTC P1699 on Subaru OBD-II 1996 & Newer models

To fix DTC P1699 on Subaru OBD-II 1996 & Newer models, consider the following:

1. Repair or replace any damaged wiring in the engine torque control cut signal circuit
2. Ensure all connections are secure and free of corrosion
3. Replace the engine control module (ECM) if found to be faulty
4. Clear the trouble codes using an OBD-II scanner after completing repairs

How to erase DTC P1699 on Subaru OBD-II 1996 & Newer models

To erase DTC P1699 on Subaru OBD-II 1996 & Newer models, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port
2. Access the scanner’s menu to clear the trouble codes stored in the ECM
3. Follow the on-screen prompts to erase the DTC P1699 code
4. Verify that the code has been successfully cleared by rescanning the ECM

Recommended tools for Subaru OBD-II 1996 & Newer models diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.