Subaru 1988 MPFI Fuel injected models DTC 37 – Oxygen sensor (no. 2, left side , SVX)
DTC 37 meaning on Subaru 1988 MPFI Fuel injected models
DTC 37 on Subaru 1988 MPFI Fuel injected models indicates an issue with the Oxygen sensor (no. 2, left side) in the SVX model. This sensor is responsible for monitoring the oxygen levels in the exhaust gases to help the engine control module adjust the air-fuel mixture for optimal combustion.
Subaru 1988 MPFI Fuel injected models DTC 37 symptoms
1. Check Engine Light (CEL) illuminated on the dashboard. 2. Decreased fuel efficiency. 3. Rough idling or stalling. 4. Poor engine performance. 5. Increased emissions.
Subaru 1988 MPFI Fuel injected models DTC 37 causes
1. Faulty Oxygen sensor. 2. Wiring issues or poor connections. 3. Exhaust leaks. 4. Engine running rich or lean. 5. Sensor contamination or buildup.
Subaru 1988 MPFI Fuel injected models DTC 37 seriousness
If left unresolved, DTC 37 can lead to decreased fuel efficiency, engine performance issues, and potential damage to the catalytic converter. It is important to address this code promptly to maintain the proper functioning of the engine.
How to diagnose DTC 37 on Subaru 1988 MPFI Fuel injected models
1. Use an OBD-II scanner to retrieve the specific fault code. 2. Inspect the Oxygen sensor wiring and connections for any damage or corrosion. 3. Check for exhaust leaks near the sensor. 4. Perform a visual inspection of the sensor for contamination or buildup. 5. Test the sensor’s voltage output using a multimeter.
How to fix DTC 37 on Subaru 1988 MPFI Fuel injected models
1. Replace the Oxygen sensor with a new, compatible unit. 2. Repair any damaged wiring or connections. 3. Fix any exhaust leaks near the sensor. 4. Clean the sensor to remove any contamination. 5. Reset the engine control module after making repairs.
How to erase DTC 37 on Subaru 1988 MPFI Fuel injected models
1. Use an OBD-II scanner to clear the fault code. 2. Disconnect the car’s battery for a few minutes to reset the ECM. 3. Drive the vehicle for a short distance to allow the ECM to relearn the sensor values. 4. Ensure the issue causing DTC 37 has been resolved before clearing the code.
Recommended tools for Subaru 1988 MPFI Fuel injected models diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.