B1412 – OBD-II DTC

OBD-II DTC B1412 – Driver Power Window Motor Circuit Short To Battery

DTC B1412 meaning

DTC B1412 refers to a diagnostic trouble code indicating a short circuit in the driver power window motor circuit to the battery. This code is triggered when the power window motor experiences an electrical fault, causing it to draw excessive current or create a direct connection to the battery voltage. This can lead to malfunctioning of the power window system.

DTC B1412 symptoms

Common symptoms associated with DTC B1412 may include:

• Power window not functioning or operating erratically
• Window motor making unusual noises
• Blown fuses related to the power window system
• Inability to control the power window from the driver’s side switch

DTC B1412 causes

Several factors can lead to the occurrence of DTC B1412, including:

• Short circuit in the wiring harness
• Faulty power window motor
• Defective window switch
• Corroded or damaged connectors
• Issues with the body control module (BCM)

DTC B1412 seriousness

DTC B1412 is considered a moderate to serious issue. While it may not affect the vehicle’s overall drivability, it can lead to safety concerns if the power windows fail to operate correctly. Additionally, continued operation with this fault can cause further electrical damage or drain the vehicle’s battery.

How to diagnose DTC B1412

To diagnose DTC B1412, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1412.
2. Inspect the power window motor and wiring for visible damage or corrosion.
3. Check the fuses related to the power window system for any blown fuses.
4. Test the power window switch for proper operation.
5. Measure the voltage and ground at the power window motor connector.
6. Perform a continuity test on the wiring harness to identify any shorts.

How to fix DTC B1412 step-by-step instructions

To fix DTC B1412, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the power window circuit.
3. Replace any blown fuses related to the power window system.
4. Test and, if necessary, replace the faulty power window motor.
5. Check and replace the window switch if it is found to be defective.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test the power window operation to ensure the issue is resolved.

How to erase DTC B1412

To erase DTC B1412, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to erase or clear codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.