B1411 – OBD-II DTC

OBD-II DTC B1411 – Driver Power Window Motor Circuit Open

DTC B1411 meaning

DTC B1411 refers to a diagnostic trouble code indicating an open circuit in the driver power window motor circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. An open circuit means that there is a break in the electrical path, preventing the power window motor from receiving the necessary voltage to operate.

DTC B1411 symptoms

Common symptoms associated with DTC B1411 may include:

• Driver’s side power window not functioning
• Window may be stuck in the closed or open position
• Inoperative window switch
• Possible warning lights on the dashboard

DTC B1411 causes

Several factors can lead to the occurrence of DTC B1411, including:

• Faulty power window motor
• Damaged wiring or connectors in the power window circuit
• Defective window switch
• Blown fuses related to the power window system
• Corrosion or poor connections in the electrical system

DTC B1411 seriousness

DTC B1411 is considered a moderate issue. While it may not affect the overall drivability of the vehicle, it can lead to safety concerns if the driver is unable to operate the window in an emergency. Additionally, it may indicate underlying electrical issues that could affect other systems in the vehicle.

How to diagnose DTC B1411

To diagnose DTC B1411, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1411 code.
2. Inspect the power window motor and associated wiring for visible damage.
3. Check the window switch for proper operation.
4. Test the voltage at the power window motor connector.
5. Examine fuses related to the power window system for continuity.
6. Perform a continuity test on the wiring harness to identify any breaks.

How to fix DTC B1411 step-by-step instructions

To fix DTC B1411, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. Replace the faulty power window motor if it is not functioning correctly.
3. Replace the window switch if it is defective.
4. Replace any blown fuses related to the power window system.
5. Ensure all connections are clean and secure to prevent corrosion.
6. Clear the DTC using an OBD-II scanner and test the system to ensure proper operation.

How to erase DTC B1411

To erase DTC B1411, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.