B1410 – OBD-II DTC

OBD-II DTC B1410 – Driver Power Window Motor Circuit Failure

DTC B1410 meaning

DTC B1410 refers to a failure in the driver power window motor circuit. This diagnostic trouble code indicates that the power window motor is not functioning correctly, which may prevent the window from operating as intended. The code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components for faults.

DTC B1410 symptoms

Common symptoms associated with DTC B1410 may include:

• Power window not operating or moving slowly
• Window may be stuck in the closed or open position
• Unusual noises from the window motor
• Inoperative window switches
• Other electrical issues in the vehicle

DTC B1410 causes

Several factors can lead to the triggering of DTC B1410, including:

• Faulty power window motor
• Damaged wiring or connectors in the power window circuit
• Defective window switch
• Blown fuses related to the power window system
• Issues with the vehicle’s body control module (BCM)

DTC B1410 seriousness

The seriousness of DTC B1410 can vary. While it may not pose an immediate safety risk, it can lead to inconvenience and potential security issues if the windows cannot be closed. Additionally, unresolved electrical issues may affect other systems in the vehicle, leading to more significant problems over time.

How to diagnose DTC B1410

To diagnose DTC B1410, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1410.
2. Inspect the power window motor and associated wiring for visible damage.
3. Check the window switch for proper operation.
4. Test the power window motor by applying direct power to see if it operates.
5. Examine fuses related to the power window circuit for continuity.
6. Check the body control module for any faults or issues.

How to fix DTC B1410 step-by-step instructions

To fix DTC B1410, follow these steps:

1. Repair or replace any damaged wiring or connectors in the power window circuit.
2. Replace the faulty power window motor if it does not operate when tested directly.
3. Replace the window switch if it is found to be defective.
4. Replace any blown fuses related to the power window system.
5. Reprogram or replace the body control module if it is determined to be faulty.
6. Clear the DTC using an OBD-II scanner and test the power window operation.

How to erase DTC B1410

To erase DTC B1410, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.