B1369 – OBD-II DTC

OBD-II DTC B1369 – Ignition Tach Circuit Short To Battery

DTC B1369 meaning

DTC B1369 refers to a diagnostic trouble code indicating a short circuit in the ignition tach circuit to the battery. This code is typically associated with issues in the vehicle’s ignition system, where the tachometer signal is improperly grounded or shorted to the battery voltage, leading to incorrect readings or failure of the tachometer to function properly.

DTC B1369 symptoms

Common symptoms associated with DTC B1369 may include:

• Inaccurate tachometer readings
• Tachometer not functioning at all
• Check Engine Light illuminated
• Possible stalling or misfiring of the engine

DTC B1369 causes

Several factors can lead to the occurrence of DTC B1369, including:

• Wiring issues, such as frayed or damaged wires
• Faulty ignition control module
• Defective tachometer or instrument cluster
• Corrosion or poor connections in the ignition circuit
• Short circuits in the ignition system

DTC B1369 seriousness

The seriousness of DTC B1369 can vary, but it is generally considered a moderate issue. While it may not cause immediate engine failure, it can lead to inaccurate engine performance readings and potential drivability issues. Ignoring this code may result in further damage to the ignition system or related components.

How to diagnose DTC B1369

To diagnose DTC B1369, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the wiring and connectors related to the ignition tach circuit for damage or corrosion.
3. Check the ignition control module for proper operation.
4. Test the tachometer and instrument cluster for functionality.
5. Perform a continuity test on the ignition tach circuit to identify any shorts.

How to fix DTC B1369 step-by-step instructions

To fix DTC B1369, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. Replace the faulty ignition control module if necessary.
3. Test and replace the tachometer or instrument cluster if they are not functioning correctly.
4. Ensure all connections are clean and secure to prevent future issues.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the code does not return.

How to erase DTC B1369

To erase DTC B1369, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.