B1364 – OBD-II DTC

OBD-II DTC B1364 – Ignition Start Circuit Open

DTC B1364 meaning

DTC B1364 refers to an “Ignition Start Circuit Open” issue. This diagnostic trouble code indicates that there is a problem within the ignition start circuit, which prevents the vehicle from starting. The vehicle’s onboard diagnostic system has detected an open circuit in the ignition system, which can lead to a failure in starting the engine.

DTC B1364 symptoms

Common symptoms associated with DTC B1364 may include:

• Engine not starting
• Intermittent starting issues
• Dashboard warning lights illuminated
• Electrical components not functioning properly

DTC B1364 causes

Several factors can lead to the occurrence of DTC B1364, including:

• Faulty ignition switch
• Damaged wiring or connectors in the ignition circuit
• Defective starter relay
• Issues with the battery or poor connections
• Faulty engine control module (ECM)

DTC B1364 seriousness

DTC B1364 is considered a serious issue as it directly affects the vehicle’s ability to start. If left unaddressed, it can lead to further electrical problems or leave the vehicle inoperable. It is advisable to diagnose and repair this issue promptly to ensure reliable vehicle operation.

How to diagnose DTC B1364

To diagnose DTC B1364, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the ignition switch for proper operation.
3. Check the wiring and connectors in the ignition circuit for damage or corrosion.
4. Test the starter relay for functionality.
5. Examine the battery and its connections for any issues.
6. Perform a continuity test on the ignition circuit.
7. Check the engine control module (ECM) for faults.

How to fix DTC B1364 step-by-step instructions

To fix DTC B1364, follow these step-by-step instructions:

1. Repair or replace any damaged wiring or connectors in the ignition circuit.
2. If the ignition switch is faulty, replace it with a new one.
3. Replace the starter relay if it is found to be defective.
4. Ensure the battery is fully charged and connections are clean and tight.
5. If the ECM is faulty, consider reprogramming or replacing it.
6. Clear the DTC using an OBD-II scanner after repairs are made.

How to erase DTC B1364

To erase DTC B1364, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the issue is resolved.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.