B1361 – OBD-II DTC

OBD-II DTC B1361 – Ignition Run/Acc Circuit Short To Battery

DTC B1361 meaning

DTC B1361 refers to a diagnostic trouble code indicating a short circuit in the ignition run/accessory circuit to the battery. This code is typically triggered when the vehicle’s onboard diagnostic system detects an abnormal voltage level in the ignition circuit, suggesting that the circuit is directly connected to the battery, which can lead to various electrical issues.

DTC B1361 symptoms

Common symptoms associated with DTC B1361 may include:

• Malfunctioning electrical components
• Inability to start the vehicle
• Dashboard warning lights illuminated
• Intermittent power loss to accessories

DTC B1361 causes

Several factors can lead to the triggering of DTC B1361, including:

• Wiring issues such as frayed or damaged wires
• Faulty ignition switch
• Short circuits in the ignition run/accessory circuit
• Corroded connectors or terminals
• Defective battery or charging system

DTC B1361 seriousness

DTC B1361 is considered a serious issue as it can affect the vehicle’s ability to start and operate properly. If left unaddressed, it may lead to further electrical problems, potentially resulting in a complete failure of the ignition system or other critical components.

How to diagnose DTC B1361

To diagnose DTC B1361, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the ignition run/accessory circuit wiring for visible damage.
3. Check the ignition switch for proper operation.
4. Test the voltage at the ignition circuit with a multimeter.
5. Examine connectors and terminals for corrosion or loose connections.
6. Perform a continuity test on the wiring to identify shorts.

How to fix DTC B1361 step-by-step instructions

To fix DTC B1361, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring in the ignition run/accessory circuit.
3. Replace the ignition switch if it is found to be faulty.
4. Clean or replace corroded connectors and terminals.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC B1361

To erase DTC B1361, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to check for any reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.