B1343 – OBD-II DTC

OBD-II DTC B1343 – Heated Backlite Input Circuit Failure

DTC B1343 meaning

DTC B1343 refers to a fault in the Heated Backlite Input Circuit. This code indicates that the vehicle’s onboard diagnostic system has detected an issue with the circuit responsible for the heated backlite, which is typically part of the rear defrost system. The heated backlite is designed to clear fog, frost, or ice from the rear window, enhancing visibility and safety while driving.

DTC B1343 symptoms

Common symptoms associated with DTC B1343 may include:

• Heated backlite not functioning
• Warning lights illuminated on the dashboard
• Inconsistent operation of the rear defrost system
• Possible issues with other electrical components in the vehicle

DTC B1343 causes

The causes of DTC B1343 can vary, but typical reasons include:

• Faulty heated backlite element
• Damaged or corroded wiring in the input circuit
• Defective connectors or terminals
• Issues with the body control module (BCM)
• Blown fuses related to the heated backlite system

DTC B1343 seriousness

DTC B1343 is considered a moderate issue. While it may not immediately affect the drivability of the vehicle, it can compromise visibility in adverse weather conditions. Addressing this code promptly is important for safety and to prevent further electrical issues in the vehicle.

How to diagnose DTC B1343

To diagnose DTC B1343, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the heated backlite element for any visible damage.
3. Check the wiring and connectors for signs of wear, corrosion, or disconnection.
4. Test the fuses related to the heated backlite circuit.
5. Examine the body control module for any faults or issues.
6. Clear the DTC and perform a road test to see if the code returns.

How to fix DTC B1343 step-by-step instructions

To fix DTC B1343, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. Replace the heated backlite element if it is faulty.
3. Replace any blown fuses related to the heated backlite circuit.
4. If necessary, reprogram or replace the body control module.
5. After repairs, clear the DTC using an OBD-II scanner.
6. Test the heated backlite system to ensure proper operation.

How to erase DTC B1343

To erase DTC B1343, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the diagnostic menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.