B1340 – OBD-II DTC

OBD-II DTC B1340 – Chime Input Request Circuit Short To Ground

DTC B1340 meaning

DTC B1340 refers to a diagnostic trouble code indicating a problem with the chime input request circuit. Specifically, it signifies that there is a short to ground in the circuit responsible for the chime input, which is typically used for alerts and notifications within the vehicle. This issue can affect the functionality of warning chimes, such as seatbelt reminders or door ajar alerts.

DTC B1340 symptoms

Common symptoms associated with DTC B1340 may include:

• Inoperative chime or alert sounds
• Continuous chime sound without cause
• Dashboard warning lights illuminated
• Possible issues with other electrical components

DTC B1340 causes

The causes of DTC B1340 can vary, but typical reasons include:

• Wiring issues, such as frayed or damaged wires
• Corrosion or poor connections in the chime circuit
• Faulty chime module or control unit
• Short circuit to ground in the chime input request circuit

DTC B1340 seriousness

DTC B1340 is considered a moderate issue. While it may not prevent the vehicle from operating, it can lead to a lack of important auditory alerts that enhance safety. Ignoring this code may result in missing critical warnings, which could increase the risk of accidents or vehicle damage.

How to diagnose DTC B1340

To diagnose DTC B1340, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiring and connectors related to the chime input request circuit for damage or corrosion.
3. Check for continuity in the circuit to identify any shorts to ground.
4. Test the chime module to ensure it is functioning correctly.
5. Clear the DTC and perform a road test to see if the code returns.

How to fix DTC B1340 step-by-step instructions

To fix DTC B1340, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the chime circuit.
2. Clean any corroded connections to ensure good electrical contact.
3. Replace the chime module if it is found to be faulty.
4. Ensure that there are no shorts to ground in the circuit.
5. Reconnect all components and clear the DTC using an OBD-II scanner.
6. Test the chime functionality to confirm the issue is resolved.

How to erase DTC B1340

To erase DTC B1340, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.