B1330 – OBD-II DTC

OBD-II DTC B1330 – Passenger Door Ajar Circuit Short To Ground

DTC B1330 meaning

DTC B1330 refers to a diagnostic trouble code indicating a short circuit to ground in the passenger door ajar circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The passenger door ajar circuit is responsible for signaling whether the passenger door is open or closed. A short to ground means that the circuit is unintentionally connected to the vehicle’s ground, causing the system to misinterpret the door’s status.

DTC B1330 symptoms

Common symptoms associated with DTC B1330 may include:

• Illumination of the warning light on the dashboard indicating a door is ajar.
• Inconsistent or false readings regarding the door’s open/closed status.
• Interior lights remaining on when the vehicle is off.
• Chimes or alerts sounding when the vehicle is in motion, indicating a door is open.

DTC B1330 causes

Several factors can lead to the occurrence of DTC B1330, including:

• Damaged or frayed wiring in the passenger door ajar circuit.
• Faulty door switch that fails to operate correctly.
• Corrosion or poor connections at the wiring harness or connectors.
• Issues with the Body Control Module (BCM) that processes the door status signals.

DTC B1330 seriousness

DTC B1330 is considered a moderate issue. While it may not affect the vehicle’s drivability, it can lead to safety concerns, such as the interior lights draining the battery or the driver being unaware of an open door while driving. Addressing this code promptly is advisable to ensure proper vehicle operation and safety.

How to diagnose DTC B1330

To diagnose DTC B1330, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1330 code.
2. Inspect the wiring and connectors associated with the passenger door ajar circuit for any visible damage or corrosion.
3. Test the door switch for proper operation using a multimeter.
4. Check for any additional codes that may indicate related issues.
5. Perform a continuity test on the circuit to identify any shorts to ground.

How to fix DTC B1330 step-by-step instructions

To fix DTC B1330, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the diagnosis.
2. Replace the faulty door switch if it does not operate correctly.
3. Clean any corrosion from connectors and ensure all connections are secure.
4. If necessary, reprogram or replace the Body Control Module (BCM) if it is determined to be faulty.
5. Clear the DTC using an OBD-II scanner and test the system to ensure the issue is resolved.

How to erase DTC B1330

To erase DTC B1330, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the trouble codes menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.