B1323 – OBD-II DTC

OBD-II DTC B1323 – Door Ajar Lamp Circuit Failure

DTC B1323 meaning

DTC B1323 refers to a fault in the Door Ajar Lamp Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the circuit responsible for signaling whether a door is ajar or not. The door ajar lamp is typically located on the dashboard and alerts the driver if any door is not fully closed.

DTC B1323 symptoms

Common symptoms associated with DTC B1323 may include:

• The door ajar warning light remains illuminated on the dashboard.
• Inconsistent or false alerts indicating that a door is open when it is closed.
• Interior lights may remain on when the vehicle is off, draining the battery.
• Possible issues with the vehicle’s locking mechanisms.

DTC B1323 causes

Several factors can lead to the triggering of DTC B1323, including:

• Faulty door ajar switch or sensor.
• Wiring issues, such as frayed or damaged wires in the door ajar circuit.
• Corrosion or poor connections at the door switch or related connectors.
• Malfunctioning body control module (BCM) that processes the door status signals.

DTC B1323 seriousness

DTC B1323 is considered a moderate issue. While it may not affect the vehicle’s drivability, it can lead to safety concerns, such as the driver being unaware of an open door. Additionally, the constant illumination of the door ajar light can be distracting and may lead to battery drain if the interior lights remain on.

How to diagnose DTC B1323

To diagnose DTC B1323, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1323 code.
2. Inspect the door ajar switch for proper operation and physical damage.
3. Check the wiring and connectors associated with the door ajar circuit for signs of wear or corrosion.
4. Test the continuity of the circuit from the door switch to the BCM.
5. Examine the BCM for any fault codes or malfunctions.

How to fix DTC B1323 step-by-step instructions

To fix DTC B1323, follow these steps:

1. Identify and replace any faulty door ajar switches or sensors.
2. Repair or replace damaged wiring or connectors in the door ajar circuit.
3. Clean any corroded connections to ensure proper electrical contact.
4. If necessary, reprogram or replace the body control module (BCM).
5. Clear the DTC using an OBD-II scanner and test the system to ensure the issue is resolved.

How to erase DTC B1323

To erase DTC B1323, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the diagnostic trouble codes menu on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to verify that the DTC does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.