B1319 – OBD-II DTC

OBD-II DTC B1319 – Driver Door Ajar Circuit Failure

DTC B1319 meaning

DTC B1319 refers to a fault in the Driver Door Ajar Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the circuit that monitors whether the driver’s door is open or closed. The system uses a switch or sensor to determine the door’s status, and if it fails to provide the correct signal, this code is triggered.

DTC B1319 symptoms

Common symptoms associated with DTC B1319 may include:

• Warning lights on the dashboard, such as the door ajar light.
• Inconsistent or incorrect door status readings.
• Chimes or alerts indicating the door is open when it is closed.
• Power door locks may not function properly.

DTC B1319 causes

Several factors can lead to the triggering of DTC B1319, including:

• Faulty door ajar switch or sensor.
• Wiring issues, such as frayed or damaged wires.
• Corrosion or poor connections in the door harness.
• Faulty body control module (BCM) that processes the door status signal.

DTC B1319 seriousness

The seriousness of DTC B1319 can vary. While it may not affect the vehicle’s drivability, it can lead to safety concerns, such as:

• Inability to determine if the door is securely closed.
• Potential for the door to open while driving if not properly secured.
• Increased battery drain due to warning lights and alerts.

How to diagnose DTC B1319

To diagnose DTC B1319, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the driver’s door ajar switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or damage.
4. Test the door ajar switch with a multimeter to ensure it operates correctly.
5. Examine the body control module for faults or software issues.

How to fix DTC B1319 step-by-step instructions

To fix DTC B1319, follow these steps:

1. Repair or replace the faulty door ajar switch if it is defective.
2. Fix any damaged wiring or connectors in the door harness.
3. Clean any corrosion found on connectors and ensure a secure connection.
4. If necessary, reprogram or replace the body control module.
5. Clear the DTC using an OBD-II scanner and test the system to ensure the issue is resolved.

How to erase DTC B1319

To erase DTC B1319, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.