B1316 – OBD-II DTC

OBD-II DTC B1316 – Battery Saver Relay Coil Circuit Short To Ground

DTC B1316 meaning

DTC B1316 refers to a diagnostic trouble code indicating a short circuit to ground in the battery saver relay coil circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The battery saver relay is responsible for controlling power to certain electrical components when the vehicle is off, helping to prevent battery drain.

DTC B1316 symptoms

Common symptoms associated with DTC B1316 may include:

• Battery drain or dead battery issues
• Inoperative electrical components
• Warning lights on the dashboard
• Unusual behavior of electronic accessories

DTC B1316 causes

Several factors can lead to the occurrence of DTC B1316, including:

• Short circuit in the battery saver relay coil circuit
• Faulty battery saver relay
• Damaged wiring or connectors in the circuit
• Corrosion or poor connections in the electrical system

DTC B1316 seriousness

The seriousness of DTC B1316 can vary, but it is generally considered a moderate issue. If left unaddressed, it can lead to:

• Increased risk of battery failure
• Potential damage to electrical components
• Inconvenience due to inoperative features

How to diagnose DTC B1316

To diagnose DTC B1316, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the battery saver relay and its connections for damage or corrosion.
3. Check the wiring for shorts to ground or other issues.
4. Test the battery saver relay operation using a multimeter.
5. Examine the vehicle’s electrical system for any additional fault codes.

How to fix DTC B1316 step-by-step instructions

To fix DTC B1316, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors in the battery saver relay circuit.
3. Replace the battery saver relay if it is found to be faulty.
4. Clean any corrosion from connectors and ensure all connections are secure.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the system to ensure the issue is resolved and the code does not return.

How to erase DTC B1316

To erase DTC B1316, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.