B1314 – OBD-II DTC

OBD-II DTC B1314 – Battery Saver Relay Coil Circuit Open

DTC B1314 meaning

DTC B1314 refers to a diagnostic trouble code indicating an issue with the Battery Saver Relay Coil Circuit. Specifically, it signifies that the circuit is open, meaning there is a break in the electrical path that prevents the relay from functioning properly. This relay is responsible for controlling the power supply to various electrical components when the vehicle is turned off, helping to conserve battery life.

DTC B1314 symptoms

Common symptoms associated with DTC B1314 may include:

• Battery drain when the vehicle is off
• Electrical components not functioning properly
• Warning lights on the dashboard
• Difficulty starting the vehicle

DTC B1314 causes

Several factors can lead to the occurrence of DTC B1314, including:

• Faulty battery saver relay
• Open or damaged wiring in the relay circuit
• Corroded or loose electrical connections
• Faulty powertrain control module (PCM)

DTC B1314 seriousness

The seriousness of DTC B1314 can vary. While it may not immediately affect vehicle drivability, it can lead to battery drain and potential failure of electrical components over time. If left unaddressed, it may result in a dead battery or other electrical issues that could compromise vehicle performance.

How to diagnose DTC B1314

To diagnose DTC B1314, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the battery saver relay for any visible damage or corrosion.
3. Check the wiring and connectors associated with the relay for continuity and signs of wear.
4. Test the relay operation by applying power directly to it and observing if it activates.
5. Examine the PCM for any related fault codes or issues.

How to fix DTC B1314 step-by-step instructions

To fix DTC B1314, follow these steps:

1. Replace the faulty battery saver relay if it is defective.
2. Repair or replace any damaged wiring or connectors in the relay circuit.
3. Clean any corroded connections to ensure proper electrical contact.
4. Test the system to ensure the relay operates correctly after repairs.
5. Clear the DTC using an OBD-II scanner and perform a test drive to confirm the issue is resolved.

How to erase DTC B1314

To erase DTC B1314, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.