B1313 – OBD-II DTC

OBD-II DTC B1313 – Battery Saver Relay Coil Circuit Failure

DTC B1313 meaning

DTC B1313 refers to a fault in the Battery Saver Relay Coil Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the relay responsible for managing the battery saver function. The battery saver relay is crucial for preventing battery drain by controlling the power supply to various electrical components when the vehicle is off.

DTC B1313 symptoms

Common symptoms associated with DTC B1313 may include:

• Battery drain or dead battery issues
• Inoperative electrical components
• Warning lights on the dashboard
• Intermittent electrical failures

DTC B1313 causes

Several factors can lead to the triggering of DTC B1313, including:

• Faulty battery saver relay
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connections
• Defective powertrain control module (PCM)

DTC B1313 seriousness

The seriousness of DTC B1313 can vary. While it may not immediately affect vehicle drivability, it can lead to battery drain and potential failure of electrical components over time. Addressing this code promptly is important to avoid further electrical issues and ensure reliable vehicle operation.

How to diagnose DTC B1313

To diagnose DTC B1313, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the battery saver relay for physical damage or corrosion.
3. Check the wiring and connectors associated with the relay for shorts or open circuits.
4. Test the relay operation using a multimeter to ensure it is functioning correctly.
5. Examine the PCM for any faults or updates that may affect relay operation.

How to fix DTC B1313 step-by-step instructions

To fix DTC B1313, follow these steps:

1. Replace the faulty battery saver relay if it is defective.
2. Repair or replace any damaged wiring or connectors found during diagnosis.
3. Clean any corroded connections to ensure proper electrical contact.
4. Recheck the relay operation after repairs to confirm functionality.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the code does not return.

How to erase DTC B1313

To erase DTC B1313, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.