B1308 – OBD-II DTC

OBD-II DTC B1308 – Oil Level Switch Circuit Short To Ground

DTC B1308 meaning

DTC B1308 refers to a diagnostic trouble code indicating a problem with the oil level switch circuit. Specifically, it signifies that there is a short to ground in the oil level switch circuit. This can lead to incorrect readings or failure of the oil level monitoring system, which is crucial for engine health.

DTC B1308 symptoms

Common symptoms associated with DTC B1308 may include:

• Illuminated check engine light
• Oil level warning light on the dashboard
• Erratic or incorrect oil level readings
• Potential engine performance issues due to low oil levels

DTC B1308 causes

The causes of DTC B1308 can include:

• Faulty oil level switch
• Wiring issues, such as frayed or damaged wires
• Corrosion in the electrical connectors
• Short circuit in the oil level switch circuit
• Faulty engine control module (ECM)

DTC B1308 seriousness

DTC B1308 is considered a moderate to serious issue. If left unaddressed, it can lead to:

• Inaccurate oil level readings, risking engine damage
• Potential engine overheating due to low oil levels
• Increased wear and tear on engine components

How to diagnose DTC B1308

To diagnose DTC B1308, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the oil level switch and its wiring for visible damage.
3. Check for continuity in the wiring between the oil level switch and the ECM.
4. Test the oil level switch with a multimeter to ensure it operates correctly.
5. Examine the ECM for any faults or issues.

How to fix DTC B1308 step-by-step instructions

To fix DTC B1308, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the oil level switch.
3. Replace the oil level switch if it is found to be faulty.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the engine and monitor for any reoccurrence of the code.

How to erase DTC B1308

To erase DTC B1308, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.