B1307 – OBD-II DTC

OBD-II DTC B1307 – Oil Level Switch Circuit Short To Battery

DTC B1307 meaning

DTC B1307 refers to a diagnostic trouble code indicating a short circuit in the oil level switch circuit to battery. This code is triggered when the vehicle’s onboard diagnostic system detects an abnormal voltage level in the oil level switch circuit, suggesting that the circuit is shorted to the battery voltage. The oil level switch is responsible for monitoring the oil level in the engine, and any issues with this circuit can lead to incorrect readings or failure to detect low oil levels.

DTC B1307 symptoms

Common symptoms associated with DTC B1307 may include:

• Illuminated check engine light
• Oil level warning light on the dashboard
• Erroneous oil level readings
• Potential engine performance issues due to low oil levels

DTC B1307 causes

Several factors can lead to the triggering of DTC B1307, including:

• Faulty oil level switch
• Wiring issues, such as frayed or damaged wires
• Corrosion in the electrical connectors
• Short circuit in the oil level switch circuit
• Faulty engine control module (ECM)

DTC B1307 seriousness

The seriousness of DTC B1307 can vary based on the vehicle’s condition and the underlying cause. However, it is generally considered a moderate issue because:

• It can lead to incorrect oil level readings, risking engine damage due to low oil levels.
• Ignoring this code may result in more severe engine problems over time.
• It is advisable to address this issue promptly to ensure proper engine lubrication and performance.

How to diagnose DTC B1307

To diagnose DTC B1307, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1307.
2. Inspect the oil level switch and its wiring for visible damage or corrosion.
3. Check the electrical connectors for secure connections and signs of wear.
4. Test the oil level switch with a multimeter to ensure it operates within specifications.
5. Examine the wiring harness for shorts to battery voltage.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC B1307 step-by-step instructions

To fix DTC B1307, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the oil level switch.
3. Replace the oil level switch if it is found to be faulty during testing.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the engine and monitor the oil level readings to ensure they are accurate.
6. Perform a road test to confirm that the DTC does not reappear.

How to erase DTC B1307

To erase DTC B1307, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the engine to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.