B1306 – OBD-II DTC

OBD-II DTC B1306 – Oil Level Switch Circuit Open

DTC B1306 meaning

DTC B1306 refers to a diagnostic trouble code indicating an open circuit in the oil level switch. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components. The oil level switch is responsible for detecting the oil level in the engine, and when it fails to send a signal due to an open circuit, the DTC is triggered.

DTC B1306 symptoms

Common symptoms associated with DTC B1306 may include:

• Illuminated check engine light
• Oil level warning light on the dashboard
• Possible engine performance issues
• Increased oil consumption

DTC B1306 causes

Several factors can lead to the occurrence of DTC B1306, including:

• Faulty oil level switch
• Wiring issues, such as frayed or broken wires
• Corrosion or poor connections in the circuit
• Faulty engine control module (ECM)

DTC B1306 seriousness

The seriousness of DTC B1306 can vary. While it may not cause immediate engine failure, it can lead to low oil levels going undetected, which can result in severe engine damage over time. It is advisable to address this code promptly to ensure proper engine lubrication and performance.

How to diagnose DTC B1306

To diagnose DTC B1306, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the oil level switch and its wiring for visible damage.
3. Check for continuity in the wiring between the oil level switch and the ECM.
4. Test the oil level switch with a multimeter to ensure it operates correctly.
5. Clear the code and perform a road test to see if it returns.

How to fix DTC B1306 step-by-step instructions

To fix DTC B1306, follow these steps:

1. Identify and repair any damaged wiring or connectors related to the oil level switch.
2. If the oil level switch is faulty, replace it with a new one.
3. Ensure all connections are secure and free of corrosion.
4. Reconnect the battery if it was disconnected during repairs.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.

How to erase DTC B1306

To erase DTC B1306, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.