B1288 – OBD-II DTC

OBD-II DTC B1288 – Servo Motor Potentiometer Airintake Right Circuit Failure

DTC B1288 meaning

DTC B1288 refers to a diagnostic trouble code indicating a failure in the servo motor potentiometer circuit associated with the air intake system on the right side. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. The servo motor potentiometer is responsible for providing feedback on the position of the air intake, which is crucial for optimal engine performance and emissions control.

DTC B1288 symptoms

Common symptoms associated with DTC B1288 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Increased fuel consumption
• Unusual engine noises
• Rough idling or stalling

DTC B1288 causes

Several factors can lead to the triggering of DTC B1288, including:

• Faulty servo motor potentiometer
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connections
• Malfunctioning engine control module (ECM)
• Mechanical issues within the air intake system

DTC B1288 seriousness

DTC B1288 is considered a moderate to serious issue. While it may not cause immediate catastrophic failure, it can lead to poor engine performance, increased emissions, and potential long-term damage if not addressed. It is advisable to diagnose and repair the issue promptly to maintain vehicle efficiency and compliance with emissions regulations.

How to diagnose DTC B1288

To diagnose DTC B1288, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiring and connectors related to the servo motor potentiometer for damage or corrosion.
3. Test the servo motor potentiometer using a multimeter to check for proper resistance values.
4. Check for any additional trouble codes that may provide further insight into the issue.
5. Examine the air intake system for any mechanical obstructions or malfunctions.

How to fix DTC B1288 step-by-step instructions

To fix DTC B1288, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the servo motor potentiometer.
3. If the potentiometer is faulty, replace it with a new one.
4. Ensure all connections are secure and free of corrosion.
5. Reassemble any components that were removed during inspection.
6. Start the engine and monitor for any reoccurrence of the DTC.

How to erase DTC B1288

To erase DTC B1288, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.