B1276 – OBD-II DTC

OBD-II DTC B1276 – Servo Motor Potentiometer Foot Circuit Failure

DTC B1276 meaning

DTC B1276 refers to a diagnostic trouble code indicating a failure in the servo motor potentiometer foot circuit. This code is typically associated with the vehicle’s electronic throttle control system, which relies on accurate readings from the potentiometer to manage engine performance and responsiveness. The potentiometer measures the position of the accelerator pedal and sends this information to the engine control module (ECM) for processing.

DTC B1276 symptoms

Common symptoms associated with DTC B1276 may include:

• Illumination of the check engine light
• Unresponsive or erratic throttle response
• Reduced engine power or performance
• Difficulty in accelerating
• Potential stalling or hesitation during driving

DTC B1276 causes

Several factors can lead to the occurrence of DTC B1276, including:

• Faulty servo motor potentiometer
• Wiring issues, such as shorts or open circuits
• Corrosion or poor connections in the electrical circuit
• Malfunctioning engine control module (ECM)
• Mechanical issues with the accelerator pedal assembly

DTC B1276 seriousness

DTC B1276 is considered a serious issue as it directly affects the vehicle’s throttle control. If left unaddressed, it can lead to:

• Increased risk of accidents due to unresponsive throttle
• Potential engine damage from improper operation
• Inability to pass emissions tests

How to diagnose DTC B1276

To diagnose DTC B1276, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the accelerator pedal assembly for any visible damage or obstruction.
3. Check the wiring and connectors associated with the servo motor potentiometer for signs of wear or corrosion.
4. Test the potentiometer using a multimeter to ensure it is functioning within specifications.
5. Examine the ECM for any software updates or faults.

How to fix DTC B1276 step-by-step instructions

To fix DTC B1276, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the potentiometer.
3. Replace the servo motor potentiometer if it is found to be faulty.
4. Ensure the accelerator pedal assembly is properly aligned and functioning.
5. Recheck the system for any additional codes after repairs.

How to erase DTC B1276

To erase DTC B1276, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.