B1264 – OBD-II DTC

OBD-II DTC B1264 – Servo Motor Foot Circuit Failure

DTC B1264 meaning

DTC B1264 refers to a fault in the servo motor foot circuit, which is part of the vehicle’s electronic control system. This code indicates that the system has detected a malfunction in the circuit responsible for controlling the footwell area, typically related to the HVAC (Heating, Ventilation, and Air Conditioning) system. The servo motor is responsible for adjusting airflow and temperature settings, and a failure in this circuit can lead to improper functioning of these systems.

DTC B1264 symptoms

Common symptoms associated with DTC B1264 may include:

• Inconsistent or incorrect airflow from the HVAC system
• Inability to adjust temperature settings
• Unusual noises from the footwell area
• Warning lights illuminated on the dashboard
• Reduced comfort due to improper climate control

DTC B1264 causes

The causes of DTC B1264 can vary, but typical reasons include:

• Faulty servo motor
• Wiring issues, such as shorts or open circuits
• Corroded or damaged connectors
• Faulty control module
• Software glitches in the vehicle’s electronic systems

DTC B1264 seriousness

DTC B1264 is considered a moderate issue. While it may not pose an immediate safety risk, it can lead to discomfort for the driver and passengers due to ineffective climate control. Additionally, if left unaddressed, it may result in further damage to the HVAC system or related components.

How to diagnose DTC B1264

To diagnose DTC B1264, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1264 code.
2. Inspect the vehicle’s wiring and connectors related to the servo motor for any visible damage or corrosion.
3. Test the servo motor for proper operation using a multimeter.
4. Check the control module for any software updates or faults.
5. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC B1264 step-by-step instructions

To fix DTC B1264, follow these step-by-step instructions:

1. Begin by inspecting the wiring and connectors for any signs of damage or corrosion.
2. If any issues are found, repair or replace the damaged wiring or connectors.
3. Test the servo motor to ensure it is functioning correctly. Replace it if it is faulty.
4. Check the control module for any software updates and apply them if necessary.
5. Reconnect all components and clear the DTC using an OBD-II scanner.
6. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC B1264

To erase DTC B1264, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and locate the B1264 code.
4. Select the option to clear or erase the code.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and monitor for any reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.