B1228 – OBD-II DTC

OBD-II DTC B1228 – Fuel Temperature Sensor #2 Circuit Short to Battery

DTC B1228 meaning

DTC B1228 refers to a diagnostic trouble code indicating a short circuit in the Fuel Temperature Sensor #2 circuit to the battery. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper operation. The fuel temperature sensor is responsible for measuring the temperature of the fuel, which is crucial for optimal engine performance and fuel efficiency.

DTC B1228 symptoms

When DTC B1228 is triggered, the following symptoms may be observed:

• Check Engine Light illuminated
• Engine performance issues
• Increased fuel consumption
• Difficulty starting the engine
• Potential stalling or rough idling

DTC B1228 causes

Several factors can lead to the occurrence of DTC B1228, including:

• Faulty Fuel Temperature Sensor #2
• Wiring issues, such as frayed or damaged wires
• Corrosion in the electrical connectors
• Short circuit in the sensor circuit
• Faulty Engine Control Module (ECM)

DTC B1228 seriousness

DTC B1228 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to poor engine performance and increased emissions. Ignoring this code can result in further damage to the fuel system or engine components, potentially leading to costly repairs.

How to diagnose DTC B1228

To diagnose DTC B1228, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the wiring and connectors related to Fuel Temperature Sensor #2 for damage or corrosion.
3. Test the resistance of the fuel temperature sensor using a multimeter.
4. Check for any additional trouble codes that may provide more context.
5. Consult the vehicle’s service manual for specific testing procedures related to the fuel temperature sensor.

How to fix DTC B1228 step-by-step instructions

To fix DTC B1228, follow these steps:

1. Clear the trouble code using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors associated with the fuel temperature sensor.
3. If the sensor is faulty, replace Fuel Temperature Sensor #2 with a new one.
4. Reconnect all electrical connections securely.
5. Start the engine and monitor for any reoccurrence of the DTC.

How to erase DTC B1228

To erase DTC B1228, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Turn off the ignition and disconnect the scanner.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.