B1219 – OBD-II DTC

OBD-II DTC B1219 – Fuel Tank Pressure Sensor Circuit Failure

DTC B1219 meaning

DTC B1219 refers to a fault in the Fuel Tank Pressure Sensor Circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the fuel tank pressure sensor, which is responsible for monitoring the pressure within the fuel tank. The sensor helps in detecting fuel vapor leaks and ensuring proper fuel system operation.

DTC B1219 symptoms

Common symptoms associated with DTC B1219 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough engine idle
• Difficulty starting the engine
• Fuel odor due to potential leaks

DTC B1219 causes

Several factors can lead to the occurrence of DTC B1219, including:

• Faulty fuel tank pressure sensor
• Wiring issues such as shorts or open circuits
• Corroded or loose electrical connectors
• Vacuum leaks in the fuel system
• Faulty Engine Control Module (ECM)

DTC B1219 seriousness

The seriousness of DTC B1219 can vary. While it may not cause immediate engine failure, it can lead to:

• Increased emissions due to improper fuel vapor management
• Potential damage to the fuel system if left unaddressed
• Reduced fuel efficiency, leading to higher operating costs

How to diagnose DTC B1219

To diagnose DTC B1219, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the fuel tank pressure sensor and its wiring for visible damage.
3. Check the electrical connectors for corrosion or loose connections.
4. Test the fuel tank pressure sensor using a multimeter to ensure it operates within specifications.
5. Look for vacuum leaks in the fuel system that may affect sensor readings.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC B1219 step-by-step instructions

To fix DTC B1219, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the fuel tank pressure sensor.
2. Replace the fuel tank pressure sensor if it is found to be faulty.
3. Address any vacuum leaks in the fuel system.
4. Ensure that the Engine Control Module (ECM) is functioning correctly.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to confirm that the issue has been resolved and the code does not return.

How to erase DTC B1219

To erase DTC B1219, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.