B1210 – OBD-II DTC

OBD-II DTC B1210 – EIC Switch-2 Assembly Circuit Open

DTC B1210 meaning

DTC B1210 refers to a diagnostic trouble code indicating an issue with the EIC (Electronic Instrument Cluster) Switch-2 assembly circuit. Specifically, it signifies that there is an open circuit condition in the switch-2 assembly, which can affect the functionality of various electronic components within the vehicle’s instrument cluster.

DTC B1210 symptoms

Common symptoms associated with DTC B1210 may include:

• Malfunctioning or non-responsive instrument cluster components
• Warning lights illuminated on the dashboard
• Inaccurate readings from gauges
• Loss of certain electronic features or controls

DTC B1210 causes

The causes of DTC B1210 can vary, but typical reasons include:

• Open circuit in the EIC Switch-2 wiring
• Faulty EIC Switch-2 assembly
• Corroded or damaged connectors
• Short circuits in the wiring harness
• Issues with the vehicle’s body control module (BCM)

DTC B1210 seriousness

DTC B1210 can be considered serious as it may lead to a complete failure of the instrument cluster or loss of critical vehicle information. While the vehicle may still be operable, the lack of accurate readings can pose safety risks, making it essential to address the issue promptly.

How to diagnose DTC B1210

To diagnose DTC B1210, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1210.
2. Inspect the EIC Switch-2 wiring and connectors for any visible damage or corrosion.
3. Check for continuity in the circuit using a multimeter.
4. Test the EIC Switch-2 assembly for proper operation.
5. Examine the body control module for any related fault codes or issues.

How to fix DTC B1210 step-by-step instructions

To fix DTC B1210, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the EIC Switch-2.
3. If the EIC Switch-2 assembly is faulty, replace it with a new unit.
4. Reconnect all connectors and wiring securely.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the DTC does not reappear.

How to erase DTC B1210

To erase DTC B1210, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and monitor for any reoccurrence of the DTC.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.