B1208 – OBD-II DTC

OBD-II DTC B1208 – EIC Switch-1 Assembly Circuit Short To Ground

DTC B1208 meaning

DTC B1208 refers to a diagnostic trouble code indicating a short circuit to ground in the EIC (Electronic Instrument Cluster) Switch-1 assembly circuit. This code is part of the OBD-II system, which monitors various vehicle components for faults. A short to ground means that there is an unintended connection between the circuit and the ground, which can disrupt normal operation.

DTC B1208 symptoms

Common symptoms associated with DTC B1208 may include:

• Malfunctioning or inoperative instrument cluster features
• Warning lights illuminated on the dashboard
• Erratic behavior of gauges or indicators
• Loss of communication with the EIC

DTC B1208 causes

Several factors can lead to the occurrence of DTC B1208, including:

• Wiring issues such as frayed or damaged wires
• Corrosion or poor connections in the EIC switch circuit
• Faulty EIC switch or assembly
• Short circuits caused by aftermarket modifications or installations

DTC B1208 seriousness

The seriousness of DTC B1208 can vary. While it may not immediately affect vehicle drivability, it can lead to critical instrument cluster failures, which may hinder the driver’s ability to monitor vehicle performance. Ignoring this code can result in further electrical issues or damage to the EIC system.

How to diagnose DTC B1208

To diagnose DTC B1208, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiring and connectors related to the EIC switch for damage or corrosion.
3. Check for any additional DTCs that may provide more context.
4. Test the EIC switch for proper operation using a multimeter.
5. Look for any signs of aftermarket modifications that could affect the circuit.

How to fix DTC B1208 step-by-step instructions

To fix DTC B1208, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the EIC switch circuit.
3. Replace the EIC switch if it is found to be faulty during testing.
4. Ensure all connections are clean and secure to prevent future issues.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the code does not reappear.

How to erase DTC B1208

To erase DTC B1208, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.