B1202 – OBD-II DTC

OBD-II DTC B1202 – Fuel Sender Circuit Open

DTC B1202 meaning

DTC B1202 refers to a diagnostic trouble code indicating an open circuit in the fuel sender circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper operation. The fuel sender circuit is responsible for transmitting fuel level information to the vehicle’s engine control module (ECM) or body control module (BCM). An open circuit means that there is a break in the electrical connection, preventing the signal from being sent correctly.

DTC B1202 symptoms

Common symptoms associated with DTC B1202 may include:

• Inaccurate fuel gauge readings
• Fuel gauge stuck at empty or full
• Warning lights illuminated on the dashboard
• Possible engine performance issues due to incorrect fuel level readings

DTC B1202 causes

Several factors can lead to the occurrence of DTC B1202, including:

• Faulty fuel sender unit
• Damaged wiring or connectors in the fuel sender circuit
• Corrosion or poor connections at the fuel sender or ECM/BCM
• Short circuits or open circuits in the wiring harness
• Faulty ECM or BCM

DTC B1202 seriousness

The seriousness of DTC B1202 can vary depending on the vehicle’s operation. While it may not cause immediate safety concerns, it can lead to:

• Inaccurate fuel level readings, resulting in running out of fuel unexpectedly
• Potential engine performance issues
• Increased difficulty in monitoring fuel consumption

It is advisable to address this code promptly to avoid further complications.

How to diagnose DTC B1202

To diagnose DTC B1202, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the fuel sender unit and its wiring for visible damage or disconnections.
3. Check the connectors for corrosion or poor connections.
4. Test the fuel sender unit with a multimeter to ensure it is functioning correctly.
5. Examine the wiring harness for continuity and shorts.
6. Check the ECM/BCM for any related fault codes or issues.

How to fix DTC B1202 step-by-step instructions

To fix DTC B1202, follow these steps:

1. Identify and repair any damaged wiring or connectors in the fuel sender circuit.
2. If the fuel sender unit is faulty, replace it with a new one.
3. Ensure all connections are clean and secure, eliminating any corrosion.
4. Test the fuel sender unit again to confirm it is functioning properly.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and the fuel gauge operates correctly.

How to erase DTC B1202

To erase DTC B1202, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.