P1150 – Mazda DTC

Mazda DTC P1150 – HO2S Bank 2 Sensor 1 Not Switching (Fuel Control Limit Reached)

DTC P1150 meaning on Mazda

DTC P1150 for Mazda indicates that the Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 is not switching properly, leading to the fuel control system reaching its limit.

Mazda DTC P1150 symptoms

• Check Engine Light (CEL) illuminated
• Decreased fuel efficiency
• Engine running rough or misfiring

Mazda DTC P1150 causes

• Faulty HO2S Bank 2 Sensor 1
• Wiring or connector issues in the sensor circuit
• Exhaust leaks affecting sensor operation
• Engine running rich or lean

Mazda DTC P1150 seriousness

The DTC P1150 on a Mazda should not be ignored as it can lead to poor engine performance, reduced fuel efficiency, and potential damage to the catalytic converter over time.

How to diagnose DTC P1150 on Mazda

1. Use an OBD-II scanner to retrieve the specific trouble code
2. Inspect the wiring and connectors related to HO2S Bank 2 Sensor 1
3. Check for exhaust leaks near the sensor
4. Perform a fuel system analysis to determine if the engine is running rich or lean

How to fix DTC P1150 on Mazda

1. Replace the HO2S Bank 2 Sensor 1 if faulty
2. Repair any damaged wiring or connectors in the sensor circuit
3. Address any exhaust leaks affecting sensor operation
4. Tune the engine to ensure proper fuel mixture

How to erase DTC P1150 on Mazda

1. Fix the underlying issue causing the DTC P1150
2. Use an OBD-II scanner to clear the trouble code
3. Drive the vehicle to allow the system to retest and verify the repair

Recommended tools for Mazda diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.