P1110 – Mazda DTC

Mazda DTC P1110 – Intake Air Temperature Sensor Signal (Dynamic Chamber) Circuit

DTC P1110 meaning on Mazda

DTC P1110 on a Mazda indicates an issue with the Intake Air Temperature Sensor Signal (Dynamic Chamber) Circuit. This diagnostic trouble code is triggered when the Engine Control Module (ECM) detects a problem with the signal from the intake air temperature sensor located in the dynamic chamber.

Mazda DTC P1110 symptoms

Symptoms of DTC P1110 on a Mazda may include:

• Check Engine Light illuminated
• Decreased engine performance
• Poor fuel efficiency
• Engine stalling or rough idling

Mazda DTC P1110 causes

Common causes of DTC P1110 on a Mazda include:

• Faulty intake air temperature sensor
• Wiring or connector issues in the intake air temperature sensor circuit
• ECM malfunction

Mazda DTC P1110 seriousness

DTC P1110 should be addressed promptly as it can lead to poor engine performance, reduced fuel efficiency, and potential drivability issues. Ignoring this code may result in further damage to engine components.

How to diagnose DTC P1110 on Mazda

To diagnose DTC P1110 on a Mazda, follow these steps:

1. Use an OBD-II scanner to retrieve the trouble codes and freeze frame data.
2. Inspect the intake air temperature sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s resistance using a multimeter to ensure it is within specifications.
4. Test the sensor’s voltage signal with the engine running to verify proper operation.
5. If necessary, perform a continuity test on the wiring harness to identify any open circuits or shorts.

How to fix DTC P1110 on Mazda

To fix DTC P1110 on a Mazda, consider the following:

1. Replace the intake air temperature sensor if it is found to be faulty.
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. If the ECM is determined to be the issue, have it diagnosed and repaired by a professional.

How to erase DTC P1110 on Mazda

To erase DTC P1110 on a Mazda:

1. Use an OBD-II scanner to clear the trouble codes from the ECM’s memory.
2. Ensure that the underlying issue causing the DTC has been resolved before clearing the code.
3. Once the repair is completed, clear the code and verify that it does not return during subsequent driving cycles.

Recommended tools for Mazda diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.