Land Rover DTC P1193 – Oxygen Sensor Heater Circuit Open Downstream
DTC P1193 meaning on Land Rover
The DTC P1193 on a Land Rover indicates a fault with the Oxygen Sensor Heater Circuit Open Downstream. This means that there is an issue with the heating element in the downstream oxygen sensor, which is responsible for monitoring the exhaust gases after they have passed through the catalytic converter.
Land Rover DTC P1193 symptoms
Some common symptoms of a DTC P1193 on a Land Rover may include:
- Illuminated check engine light
- Poor fuel economy
- Engine running rough
- Reduced engine performance
Land Rover DTC P1193 causes
The potential causes of a DTC P1193 on a Land Rover can include:
- Faulty downstream oxygen sensor
- Open or short circuit in the oxygen sensor heater circuit
- Corrosion or damage to the sensor wiring
- Issues with the engine control module (ECM)
Land Rover DTC P1193 seriousness
While a DTC P1193 may not cause immediate drivability issues, it can lead to poor engine performance and increased emissions. Ignoring this fault can result in further damage to the catalytic converter and other engine components over time.
How to diagnose DTC P1193 on Land Rover
To diagnose a DTC P1193 on a Land Rover, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the downstream oxygen sensor and its wiring for any visible damage
- Test the oxygen sensor heater circuit for continuity and proper voltage
- Check the ECM for any stored codes related to the oxygen sensor
How to fix DTC P1193 on Land Rover
To fix a DTC P1193 on a Land Rover, the following steps may be taken:
- Replace the downstream oxygen sensor if it is found to be faulty
- Repair any open or short circuits in the oxygen sensor heater circuit
- Repair or replace damaged wiring as needed
- If the issue persists, further diagnosis of the ECM may be required
How to erase DTC P1193 on Land Rover
After the underlying issue causing the DTC P1193 on a Land Rover has been resolved, the fault code can be cleared using a diagnostic scanner. This will erase the code from the ECM’s memory and turn off the check engine light. It is important to ensure that the repair has been successful before clearing the code to prevent it from reoccurring.
Recommended tools for Land Rover diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.