P0327 – Land Rover DTC

Land Rover DTC P0327 – Background Noise Low Fault Bank A

DTC P0327 meaning on Land Rover

DTC P0327 on a Land Rover indicates a fault with the Knock Sensor 1 Circuit Low Input Bank 1 or single sensor. This code is triggered when the powertrain control module (PCM) detects that the knock sensor signal is lower than the normal operating range.

Land Rover DTC P0327 symptoms

Symptoms of DTC P0327 on a Land Rover may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine performance
• In some cases, there may be no noticeable symptoms

Land Rover DTC P0327 causes

The common causes of DTC P0327 on a Land Rover include:

• Defective knock sensor
• Wiring issues in the knock sensor circuit
• Poor electrical connection related to the knock sensor
• Engine mechanical problems causing false knock sensor readings

Land Rover DTC P0327 seriousness

While DTC P0327 may not always result in immediate drivability issues, it is important to address this fault promptly. Ignoring this fault can lead to potential engine damage or reduced performance over time.

How to diagnose DTC P0327 on Land Rover

To diagnose DTC P0327 on a Land Rover, follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and freeze frame data
2. Inspect the knock sensor and its wiring for any visible damage or corrosion
3. Test the knock sensor using a multimeter to check for proper resistance
4. Check the knock sensor circuit for continuity and proper voltage
5. Perform a thorough inspection of the engine for any mechanical issues that could trigger false knock sensor readings

How to fix DTC P0327 on Land Rover

To fix DTC P0327 on a Land Rover, consider the following steps:

1. Replace the faulty knock sensor if it is determined to be the cause of the fault
2. Repair or replace any damaged wiring or connectors in the knock sensor circuit
3. Address any underlying engine mechanical issues that may be causing false knock sensor readings
4. Clear the fault code and test drive the vehicle to ensure the issue has been resolved

How to erase DTC P0327 on Land Rover

To erase DTC P0327 on a Land Rover, follow these steps:

1. Use an OBD-II scanner to clear the fault code from the PCM memory
2. Ensure that the underlying issue causing the fault has been resolved before clearing the code
3. Perform a test drive to confirm that the fault code does not return

Recommended tools for Land Rover diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.