Jeep DTC P1295 – No 5 Volts To TP Sensor
DTC P1295 meaning on Jeep
DTC P1295 on a Jeep indicates that there is no 5-volt reference voltage to the Throttle Position (TP) sensor.
Jeep DTC P1295 symptoms
Symptoms of DTC P1295 on a Jeep may include:
- Check Engine Light illuminated
- Engine may run rough or stall
- Reduced engine performance
Jeep DTC P1295 causes
Common causes of DTC P1295 on a Jeep include:
- Failed TP sensor
- Wiring or connector issues in the TP sensor circuit
- Faulty Engine Control Module (ECM)
Jeep DTC P1295 seriousness
DTC P1295 should be addressed promptly as it can lead to drivability issues and potential engine damage if left unresolved.
How to diagnose DTC P1295 on Jeep
To diagnose DTC P1295 on a Jeep, follow these steps:
- Use a scan tool to retrieve the fault codes and verify the presence of P1295.
- Inspect the TP sensor wiring and connector for any damage or corrosion.
- Check the TP sensor for proper operation using a multimeter.
- If necessary, test the 5-volt reference signal at the TP sensor connector.
How to fix DTC P1295 on Jeep
To fix DTC P1295 on a Jeep, consider the following steps:
- Replace the TP sensor if it is found to be faulty.
- Repair any damaged wiring or connectors in the TP sensor circuit.
- If the issue persists, have the ECM checked and replaced if necessary.
How to erase DTC P1295 on Jeep
To erase DTC P1295 on a Jeep, use a scan tool to clear the fault codes stored in the ECM memory. Ensure that the underlying issue causing the fault code has been resolved before clearing the code.
Recommended tools for Jeep diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.