P1130 – Jaguar DTC

Jaguar DTC P1130 – Heated oxygen sensors (H02S) 1 (upstream), bank 1

DTC P1130 meaning on Jaguar

DTC P1130 refers to an issue with the Heated Oxygen Sensor (HO2S) 1 located upstream in bank 1 of a Jaguar vehicle. This sensor is responsible for monitoring the oxygen levels in the exhaust gases to help the engine control module adjust the air-fuel mixture for optimal combustion.

Jaguar DTC P1130 symptoms

Symptoms of DTC P1130 in a Jaguar may include:

• Check Engine Light illuminated on the dashboard
• Poor fuel economy
• Engine running rough or misfiring
• Reduced engine performance

Jaguar DTC P1130 causes

Common causes of DTC P1130 on a Jaguar include:

• Faulty Heated Oxygen Sensor (HO2S) 1
• Wiring or connector issues in the sensor circuit
• Exhaust system leaks
• Engine vacuum leaks

Jaguar DTC P1130 seriousness

Ignoring DTC P1130 in a Jaguar can lead to decreased fuel efficiency, engine performance issues, and potential damage to the catalytic converter over time. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1130 on Jaguar

To diagnose DTC P1130 on a Jaguar, a mechanic may perform the following steps:

1. Use an OBD-II scanner to retrieve the specific fault code
2. Inspect the Heated Oxygen Sensor (HO2S) 1 and its wiring for any visible damage
3. Check for exhaust or vacuum leaks that could affect sensor readings
4. Perform a voltage test on the sensor to determine its functionality

How to fix DTC P1130 on Jaguar

To fix DTC P1130 on a Jaguar, the following steps may be taken:

1. Replace the faulty Heated Oxygen Sensor (HO2S) 1 with a new, compatible sensor
2. Repair any damaged wiring or connectors in the sensor circuit
3. Address any exhaust or vacuum leaks that could be affecting sensor performance
4. Clear the fault code from the vehicle’s ECU using an OBD-II scanner

How to erase DTC P1130 on Jaguar

To erase DTC P1130 on a Jaguar, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port
2. Select the option to clear fault codes from the ECU
3. Confirm the action and wait for the scanner to erase the DTC P1130 code
4. Disconnect the scanner and start the vehicle to ensure the code has been successfully cleared

Recommended tools for Jaguar diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.