P1108 – Jaguar DTC

Jaguar DTC P1108 – Manifold absolute pressure (MAP) sensor – signal voltage high

DTC P1108 meaning on Jaguar

The DTC P1108 for Jaguar indicates a high signal voltage from the Manifold Absolute Pressure (MAP) sensor. This means that the sensor is reporting a pressure reading that is higher than expected by the engine control module.

Jaguar DTC P1108 symptoms

1. Check Engine Light (MIL) illuminated on the dashboard. 2. Reduced engine performance. 3. Poor fuel efficiency. 4. Rough idling or stalling.

Jaguar DTC P1108 causes

1. Faulty MAP sensor. 2. Wiring issues such as short circuits or open circuits in the MAP sensor circuit. 3. Intake manifold leaks. 4. Incorrect sensor installation. 5. Engine vacuum leaks.

Jaguar DTC P1108 seriousness

The DTC P1108 should be addressed promptly as it can lead to poor engine performance, reduced fuel efficiency, and potential drivability issues. Ignoring this fault may result in further damage to engine components.

How to diagnose DTC P1108 on Jaguar

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data. 2. Inspect the MAP sensor and its wiring for any visible damage. 3. Perform a vacuum leak test to check for any leaks in the intake system. 4. Test the MAP sensor voltage using a multimeter to verify the high signal voltage.

How to fix DTC P1108 on Jaguar

1. Replace the faulty MAP sensor with a new one. 2. Repair any damaged wiring in the MAP sensor circuit. 3. Fix any intake manifold leaks. 4. Ensure the correct installation of the MAP sensor. 5. Clear the fault code and perform a test drive to verify the repair.

How to erase DTC P1108 on Jaguar

1. Use a diagnostic scanner to clear the fault code from the engine control module. 2. Disconnect the vehicle’s battery for a few minutes to reset the system. 3. After performing the necessary repairs, ensure the fault code does not return by monitoring the vehicle’s performance.

Recommended tools for Jaguar diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.