P1353 – Ford DTC

Ford DTC P1353 – Ignition Coil B – Primary circuit fault

DTC P1353 meaning on Ford

DTC P1353 for Ford indicates an ignition coil B primary circuit fault. This fault code is specific to the ignition system of the vehicle and points to an issue with the primary circuit of the ignition coil for cylinder B.

Ford DTC P1353 symptoms

Symptoms of DTC P1353 on a Ford may include:

• Engine misfires
• Loss of power
• Rough idling
• Difficulty starting the engine
• Illuminated check engine light

Ford DTC P1353 causes

Common causes of DTC P1353 on a Ford include:

• Defective ignition coil for cylinder B
• Faulty wiring or connectors in the ignition coil circuit
• Issues with the ignition control module
• ECU (Engine Control Unit) malfunction

Ford DTC P1353 seriousness

Ignoring DTC P1353 on a Ford can lead to further engine performance issues and potential damage. It is important to address this fault code promptly to prevent more severe problems and ensure the vehicle operates correctly.

How to diagnose DTC P1353 on Ford

To diagnose DTC P1353 on a Ford, you can perform the following steps:

1. Use an OBD-II scanner to retrieve the fault code and confirm DTC P1353.
2. Inspect the ignition coil for cylinder B and check for any visible damage or signs of wear.
3. Test the wiring and connectors in the ignition coil circuit for continuity and proper connection.
4. Check the ignition control module and ECU for any faults or malfunctions.

How to fix DTC P1353 on Ford

To fix DTC P1353 on a Ford, you can follow these steps:

1. Replace the ignition coil for cylinder B if it is found to be defective.
2. Repair or replace any damaged wiring or connectors in the ignition coil circuit.
3. If the ignition control module is faulty, replace it with a new one.
4. If the ECU is suspected to be the issue, have it diagnosed and repaired or replaced by a professional.

How to erase DTC P1353 on Ford

To erase DTC P1353 on a Ford, you can clear the fault code using an OBD-II scanner. Follow these steps:

1. Connect the OBD-II scanner to the vehicle’s diagnostic port.
2. Access the scanner’s menu and select the option to clear fault codes.
3. Confirm the action and wait for the scanner to erase the DTC P1353 code.
4. Once the code is cleared, restart the vehicle to ensure the check engine light is no longer illuminated.

Recommended tools for Ford diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.