Chrysler DTC P1295 – No 5 Volts To TP Sensor
DTC P1295 meaning on Chrysler
DTC P1295 on a Chrysler indicates that there is no 5-volt reference voltage to the Throttle Position (TP) sensor.
Chrysler DTC P1295 symptoms
Symptoms of DTC P1295 on a Chrysler may include:
- Check Engine Light illuminated
- Engine may run rough or stall
- Reduced engine performance
Chrysler DTC P1295 causes
Common causes of DTC P1295 on a Chrysler include:
- Failed TP sensor
- Wiring or connector issues in the TP sensor circuit
- Faulty Engine Control Module (ECM)
Chrysler DTC P1295 seriousness
DTC P1295 should be addressed promptly as it can lead to drivability issues and potential engine damage if left unresolved.
How to diagnose DTC P1295 on Chrysler
To diagnose DTC P1295 on a Chrysler, follow these steps:
- Use a scan tool to retrieve the fault codes and confirm P1295.
- Inspect the TP sensor wiring and connector for any damage or corrosion.
- Test the TP sensor using a multimeter to check for proper voltage readings.
- Check the ECM for any signs of malfunction.
How to fix DTC P1295 on Chrysler
To fix DTC P1295 on a Chrysler, consider the following:
- Replace the TP sensor if faulty.
- Repair any damaged wiring or connectors in the TP sensor circuit.
- If the ECM is determined to be faulty, replace it with a new one.
How to erase DTC P1295 on Chrysler
To erase DTC P1295 on a Chrysler, use a scan tool to clear the fault codes after the underlying issue has been resolved.
Recommended tools for Chrysler diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.