BMW DTC P0004 – Fuel Volume Regulator ‘A’ Control Circuit High
DTC P0004 meaning on BMW
The Diagnostic Trouble Code (DTC) P0004 for BMW refers to the Fuel Volume Regulator ‘A’ Control Circuit High. This code indicates that the engine control module (ECM) has detected a high voltage condition in the control circuit of the fuel volume regulator ‘A’. The fuel volume regulator is responsible for controlling the amount of fuel delivered to the engine, and a high voltage in the control circuit can lead to improper fuel delivery.
BMW DTC P0004 symptoms
Symptoms associated with DTC P0004 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Decreased fuel efficiency
- Engine misfires or rough idling
- Reduced engine performance
BMW DTC P0004 causes
The common causes of DTC P0004 on a BMW include:
- Faulty fuel volume regulator ‘A’
- Short circuit or open circuit in the control circuit of the fuel volume regulator
- Corrosion or poor connections in the wiring related to the fuel volume regulator
- Issues with the ECM or related control modules
BMW DTC P0004 seriousness
DTC P0004 should not be ignored as it can lead to poor engine performance, decreased fuel efficiency, and potential damage to engine components over time. It is recommended to address this issue promptly to prevent further complications.
How to diagnose DTC P0004 on BMW
To diagnose DTC P0004 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM
- Inspect the wiring and connectors related to the fuel volume regulator ‘A’
- Test the fuel volume regulator for proper operation
- Check for any other related issues that may be causing the high voltage condition
How to fix DTC P0004 on BMW
To fix DTC P0004 on a BMW, the following steps may be taken:
- Replace the faulty fuel volume regulator ‘A’
- Repair any damaged wiring or connectors in the control circuit
- Clean or replace any corroded connections
- Reset the fault codes and perform a test drive to ensure the issue has been resolved
How to erase DTC P0004 on BMW
To erase DTC P0004 on a BMW, the fault codes can be cleared using a diagnostic scanner. After the necessary repairs have been made and the issue has been resolved, the mechanic can use the scanner to clear the fault codes from the ECM’s memory. This will turn off the Check Engine Light and reset the system for normal operation.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.