C1229 – BMW DTC

BMW DTC C1229 – Left Front Wheel Speed Sensor Circuit Electrical

DTC C1229 meaning on BMW

DTC C1229 on a BMW indicates an issue with the left front wheel speed sensor circuit’s electrical signal. The control module detects a discrepancy in the voltage or resistance in the circuit, leading to the triggering of this diagnostic trouble code.

BMW DTC C1229 symptoms

Symptoms of DTC C1229 on a BMW may include:

• ABS warning light illuminated on the dashboard
• Traction control system malfunction
• Loss of stability control
• Erratic braking behavior

BMW DTC C1229 causes

Common causes of DTC C1229 on a BMW include:

• Faulty left front wheel speed sensor
• Wiring or connector issues in the circuit
• Corrosion or damage to sensor components
• Electronic control module failure

BMW DTC C1229 seriousness

The seriousness of DTC C1229 on a BMW lies in the compromised functionality of the vehicle’s safety systems. With this fault, the ABS, traction control, and stability control systems may not operate as intended, potentially affecting the vehicle’s handling and braking performance.

How to diagnose DTC C1229 on BMW

To diagnose DTC C1229 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s system.
2. Inspect the left front wheel speed sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s resistance and voltage readings using a multimeter to verify its functionality.
4. Perform a visual inspection of the sensor’s mounting and surrounding components for any signs of wear or impact damage.

How to fix DTC C1229 on BMW

To fix DTC C1229 on a BMW, consider the following steps:

1. Replace the left front wheel speed sensor if it is found to be faulty.
2. Repair any damaged wiring or connectors in the circuit to ensure proper electrical connections.
3. Clean any corrosion from the sensor components and connectors to improve signal transmission.
4. If the issue persists, consult a professional mechanic or dealership for further diagnosis and repair.

How to erase DTC C1229 on BMW

To erase DTC C1229 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the vehicle’s system.
2. After performing the necessary repairs, reset the system by disconnecting the vehicle’s battery for a few minutes.
3. Reconnect the battery and start the vehicle to see if the fault code has been successfully erased.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.