C10BF – BMW DTC

BMW DTC C10BF – Brake System Control Module Valve Power Supply Circuit Low

DTC C10BF meaning on BMW

DTC C10BF on a BMW refers to a fault in the Brake System Control Module Valve Power Supply Circuit. This diagnostic trouble code indicates that the voltage in the power supply circuit for the brake system control module valve is lower than the specified threshold.

BMW DTC C10BF symptoms

Symptoms of DTC C10BF on a BMW may include:

• ABS warning light illuminated on the dashboard
• Brake system malfunction warning message
• Loss of ABS functionality
• Decreased braking performance

BMW DTC C10BF causes

Common causes of DTC C10BF on a BMW include:

• Faulty brake system control module valve
• Wiring or connection issues in the power supply circuit
• Low voltage in the vehicle’s electrical system

BMW DTC C10BF seriousness

DTC C10BF should be taken seriously as it indicates a potential issue with the brake system control module valve power supply circuit. Driving with this fault can compromise the vehicle’s braking performance and safety. It is recommended to address this issue promptly.

How to diagnose DTC C10BF on BMW

To diagnose DTC C10BF on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s system
2. Inspect the brake system control module valve and its connections for any visible damage or corrosion
3. Check the voltage in the power supply circuit to determine if it is below the specified threshold
4. Perform a thorough inspection of the wiring harness and connectors for any signs of wear or damage

How to fix DTC C10BF on BMW

To fix DTC C10BF on a BMW, the following steps may be taken:

1. Replace the faulty brake system control module valve if necessary
2. Repair any damaged wiring or connectors in the power supply circuit
3. Ensure the vehicle’s electrical system is providing the correct voltage
4. Clear the fault codes using a diagnostic scanner after the repairs have been completed

How to erase DTC C10BF on BMW

To erase DTC C10BF on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Access the scanner’s menu to clear the fault codes stored in the system
3. Follow the on-screen instructions to erase the DTC C10BF code
4. Verify that the code has been successfully cleared by rescanning the vehicle’s system

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.