C10BE – BMW DTC

BMW DTC C10BE – Brake Pedal Position Sensor ‘B’ Voltage Out of Range High

DTC C10BE meaning on BMW

The DTC C10BE on a BMW indicates that the Brake Pedal Position Sensor ‘B’ is reporting a voltage that is out of the acceptable high range. This sensor is responsible for monitoring the position of the brake pedal, which is crucial for various vehicle systems, including the braking system and transmission control.

BMW DTC C10BE symptoms

Symptoms of the DTC C10BE on a BMW may include:

• Malfunction indicator light (MIL) or check engine light illuminated on the dashboard
• Brake system warning light may be illuminated
• Issues with brake performance or transmission shifting

BMW DTC C10BE causes

The DTC C10BE on a BMW can be caused by various factors, including:

• Faulty brake pedal position sensor ‘B’
• Wiring or connector issues in the sensor circuit
• Interference from other electrical components

BMW DTC C10BE seriousness

The DTC C10BE should be addressed promptly as it can affect the proper functioning of critical vehicle systems like the brakes and transmission. Ignoring this issue may lead to unsafe driving conditions and potential damage to the vehicle.

How to diagnose DTC C10BE on BMW

To diagnose the DTC C10BE on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes and confirm the presence of DTC C10BE.
2. Inspect the brake pedal position sensor ‘B’ and its wiring for any visible damage or corrosion.
3. Perform a voltage test on the sensor to check for proper operation.
4. Check for any related DTCs that may provide additional information on the issue.

How to fix DTC C10BE on BMW

To fix the DTC C10BE on a BMW, you can try the following solutions:

1. Replace the brake pedal position sensor ‘B’ if it is found to be faulty.
2. Repair any damaged wiring or connectors in the sensor circuit.
3. Clear the fault codes using a diagnostic scanner after the repair is completed.
4. Perform a test drive to ensure that the issue has been resolved.

How to erase DTC C10BE on BMW

To erase the DTC C10BE on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer. Follow these steps:

1. Connect the diagnostic scanner to the OBD-II port of the BMW.
2. Select the option to erase fault codes or clear DTCs from the scanner menu.
3. Wait for the scanner to communicate with the vehicle’s computer and complete the process.
4. Verify that the DTC C10BE has been successfully erased by checking for any remaining fault codes.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.