BMW DTC C10A8 – Brake Pedal Position Sensor ‘A’/’B’ Swapped
DTC C10A8 meaning on BMW
DTC C10A8 on a BMW indicates that the brake pedal position sensor ‘A’ and ‘B’ have been swapped. This means that the signals from the two brake pedal position sensors are being received in the wrong order or position by the vehicle’s control module.
BMW DTC C10A8 symptoms
Symptoms of DTC C10A8 on a BMW may include inconsistent brake pedal feel, incorrect brake light operation, traction control or stability control issues, and potentially even a limp mode where the vehicle’s performance is limited.
BMW DTC C10A8 causes
The most common causes of DTC C10A8 on a BMW are typically related to wiring issues, sensor installation errors, or faulty brake pedal position sensors. It could also be triggered by a malfunction in the control module that interprets the sensor signals.
BMW DTC C10A8 seriousness
While DTC C10A8 may not pose an immediate safety risk, it is crucial to address this issue promptly to ensure the proper functioning of the vehicle’s braking system and related safety features. Ignoring this fault could potentially lead to unsafe driving conditions.
How to diagnose DTC C10A8 on BMW
To diagnose DTC C10A8 on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault codes and then perform a visual inspection of the brake pedal position sensors and their wiring. Testing the sensors for proper operation and checking the signal outputs would help pinpoint the issue.
How to fix DTC C10A8 on BMW
Fixing DTC C10A8 on a BMW usually involves correcting the wiring connections of the brake pedal position sensors, ensuring they are installed in the correct order, and replacing any faulty sensors if necessary. Additionally, resetting the fault codes and performing a test drive to verify the repair is recommended.
How to erase DTC C10A8 on BMW
To erase DTC C10A8 on a BMW, the fault codes can be cleared using a diagnostic scanner or by disconnecting the vehicle’s battery for a few minutes. After clearing the codes, it is essential to ensure that the issue causing the fault code has been properly addressed to prevent it from reoccurring.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.