C1095 – BMW DTC

BMW DTC C1095 – Internal DSC Control Module Valve Coil ‘L’ Circuit Electrical

DTC C1095 meaning on BMW

DTC C1095 on a BMW refers to an Internal DSC (Dynamic Stability Control) Control Module Valve Coil ‘L’ Circuit Electrical fault. This fault code indicates an issue with the electrical circuit related to the valve coil ‘L’ within the DSC control module.

BMW DTC C1095 symptoms

Symptoms of DTC C1095 on a BMW may include:

• ABS (Anti-lock Braking System) warning light illuminated on the dashboard
• Stability control system malfunction warning message
• Decreased stability and traction control performance

BMW DTC C1095 causes

Possible causes of DTC C1095 on a BMW include:

• Faulty DSC control module
• Wiring or connection issues in the valve coil ‘L’ circuit
• Internal component failure within the DSC control module

BMW DTC C1095 seriousness

DTC C1095 should be addressed promptly as it can affect the proper functioning of the vehicle’s stability and traction control systems. Ignoring this fault code may compromise the safety and handling of the vehicle, especially in adverse driving conditions.

How to diagnose DTC C1095 on BMW

To diagnose DTC C1095 on a BMW, a comprehensive diagnostic scan tool capable of reading BMW-specific fault codes is required. The following steps can be taken:

1. Retrieve the fault codes from the DSC control module using a diagnostic scan tool
2. Inspect the wiring and connections related to the valve coil ‘L’ circuit for any visible damage or corrosion
3. Perform a continuity test on the circuit to check for any open or short circuits
4. If necessary, test the DSC control module for internal faults or failures

How to fix DTC C1095 on BMW

Fixing DTC C1095 on a BMW may involve the following steps:

1. Repair or replace any damaged wiring or connections in the valve coil ‘L’ circuit
2. If the DSC control module is faulty, it may need to be replaced or reprogrammed
3. Clear the fault codes using a diagnostic scan tool after the repairs have been completed

How to erase DTC C1095 on BMW

To erase DTC C1095 on a BMW:

1. Use a diagnostic scan tool to access the DSC control module
2. Select the option to clear the fault codes stored in the module
3. Follow the on-screen prompts to confirm the deletion of the fault code
4. Verify that the fault code has been successfully erased by rescanning the system

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.