C058F – BMW DTC

BMW DTC C058F – Regeneration Torque Performance

DTC C058F meaning on BMW

DTC C058F on a BMW refers to ¨Regeneration Torque Performance.¨ This diagnostic trouble code indicates that there is an issue with the regeneration torque performance of the vehicle’s system. The regeneration torque is a critical aspect of the vehicle’s emissions control system, particularly in diesel engines, where it helps in the regeneration process of the diesel particulate filter (DPF).

BMW DTC C058F symptoms

Symptoms of DTC C058F on a BMW may include:

• Reduced engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated on the dashboard
• Issues with the DPF regeneration process

BMW DTC C058F causes

The common causes of DTC C058F on a BMW include:

• Malfunctioning regeneration torque sensor
• Faulty regeneration torque control module
• Wiring or connection issues in the regeneration torque system
• Software glitches in the engine control module (ECM)

BMW DTC C058F seriousness

DTC C058F should not be ignored as it can lead to poor engine performance, increased emissions, and potential damage to the DPF system. Ignoring this fault may result in the vehicle failing to meet emission standards and could lead to more severe engine problems over time.

How to diagnose DTC C058F on BMW

To diagnose DTC C058F on a BMW, a diagnostic scan tool capable of reading BMW-specific fault codes is required. The following steps can be taken:

1. Connect the diagnostic scan tool to the vehicle’s OBD-II port
2. Read the fault codes stored in the ECM
3. Interpret the DTC C058F code and any accompanying codes
4. Perform a visual inspection of the regeneration torque system components
5. Test the regeneration torque sensor and control module for proper operation

How to fix DTC C058F on BMW

To fix DTC C058F on a BMW, the following steps can be taken:

1. Inspect and repair any damaged wiring or connections in the regeneration torque system
2. Replace the regeneration torque sensor if faulty
3. Replace the regeneration torque control module if necessary
4. Update the ECM software to the latest version
5. Clear the fault codes and perform a test drive to ensure the issue is resolved

How to erase DTC C058F on BMW

To erase DTC C058F on a BMW, follow these steps:

1. Use a diagnostic scan tool to clear the fault codes stored in the ECM
2. Ensure that the underlying issue causing the fault code has been resolved
3. Perform a test drive to confirm that the fault code does not reappear

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.