BMW DTC C0557 – Left Rear Wheel Speed Sensor Incorrect Component Installed
DTC C0557 meaning on BMW
DTC C0557 on a BMW indicates that the left rear wheel speed sensor has detected an incorrect component installed. This means that the sensor is not receiving the expected signals or readings from the component it is supposed to monitor, leading to a fault code being triggered.
BMW DTC C0557 symptoms
Symptoms of DTC C0557 on a BMW may include:
- ABS warning light illuminated on the dashboard
- Traction control system malfunction
- Loss of stability control
- Irregular braking behavior
BMW DTC C0557 causes
The common causes of DTC C0557 on a BMW include:
- Incorrect installation of the left rear wheel speed sensor
- Defective wheel speed sensor
- Wiring issues or sensor connection problems
- Faulty ABS control module
BMW DTC C0557 seriousness
DTC C0557 should be taken seriously as it can affect the proper functioning of the ABS and stability control systems in the vehicle. Driving with this fault unresolved may compromise the safety and performance of the BMW.
How to diagnose DTC C0557 on BMW
To diagnose DTC C0557 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault code and identify the specific wheel speed sensor involved.
- Inspect the left rear wheel speed sensor for any visible damage or incorrect installation.
- Check the wiring and connections related to the sensor for any signs of wear, corrosion, or disconnection.
- If necessary, perform a resistance test on the sensor to determine its functionality.
How to fix DTC C0557 on BMW
To fix DTC C0557 on a BMW, you can try the following solutions:
- Reinstall the left rear wheel speed sensor correctly if it was improperly installed.
- Replace the faulty wheel speed sensor with a new one if it is damaged or malfunctioning.
- Repair any wiring issues or connections related to the sensor.
- If needed, replace the ABS control module if it is determined to be the cause of the fault.
How to erase DTC C0557 on BMW
To erase DTC C0557 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s memory. After fixing the underlying issue causing the fault code, you can reset the system and ensure that the ABS and stability control systems are functioning properly.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.