C054D – BMW DTC

BMW DTC C054D – Vacuum Sensor ‘B’ Circuit/Open

DTC C054D meaning on BMW

DTC C054D on a BMW refers to a fault with the Vacuum Sensor ‘B’ Circuit/Open. This diagnostic trouble code indicates that there is an issue with the circuit or an open connection related to the vacuum sensor ‘B’ in the vehicle’s system.

BMW DTC C054D symptoms

Symptoms of DTC C054D on a BMW may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance
• Engine stalling or rough idling
• Decreased fuel efficiency

BMW DTC C054D causes

Common causes of DTC C054D on a BMW include:

• Faulty vacuum sensor ‘B’
• Wiring issues or open circuit in the sensor circuit
• Loose or corroded electrical connections

BMW DTC C054D seriousness

DTC C054D should not be ignored as it can lead to poor engine performance and potential drivability issues. While the vehicle may still be operable with this fault, it is recommended to address the issue promptly to prevent further damage and ensure optimal vehicle operation.

How to diagnose DTC C054D on BMW

To diagnose DTC C054D on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the vacuum sensor ‘B’ and its wiring for any visible damage or corrosion
3. Test the sensor’s resistance and voltage to determine if it is functioning correctly
4. Check for any loose or disconnected electrical connections

How to fix DTC C054D on BMW

To fix DTC C054D on a BMW, the following steps may be taken:

1. Replace the faulty vacuum sensor ‘B’ if it is determined to be the cause of the issue
2. Repair any damaged wiring or open circuits in the sensor circuit
3. Ensure all electrical connections are secure and free of corrosion
4. Clear the fault code and reset the Check Engine Light

How to erase DTC C054D on BMW

To erase DTC C054D on a BMW, you can:

1. Use a diagnostic scanner to clear the fault code from the vehicle’s system
2. Alternatively, disconnect the vehicle’s battery for a few minutes to reset the system and clear the code
3. After clearing the code, ensure that the issue has been resolved and the Check Engine Light stays off

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.