A670 – BMW DTC

BMW DTC A670 – Fogging Sensor

DTC A670 meaning on BMW

DTC A670 refers to a fault code related to the fogging sensor in BMW vehicles. This sensor is responsible for detecting moisture on the windshield and triggering the defrosting system to improve visibility. When the DTC A670 is triggered, it indicates that there is a malfunction or issue with the fogging sensor or its circuit.

BMW DTC A670 symptoms

Common symptoms associated with DTC A670 may include:

• Increased fogging on the windshield
• Defrost system not activating when needed
• Warning lights on the dashboard
• Inconsistent climate control performance

BMW DTC A670 causes

The causes of DTC A670 can vary, but typical reasons include:

• Faulty fogging sensor
• Wiring issues or damaged connectors
• Corrosion in the sensor or its connections
• Software glitches in the vehicle’s control module

BMW DTC A670 seriousness

DTC A670 is considered a moderate issue. While it may not immediately affect the drivability of the vehicle, it can lead to reduced visibility due to fogging, which poses a safety risk. Addressing this code promptly is important to ensure optimal performance of the defrosting system and overall safety while driving.

How to diagnose DTC A670 on BMW

To diagnose DTC A670, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC A670.
2. Inspect the fogging sensor and its wiring for visible damage or corrosion.
3. Check the connections to ensure they are secure and free of debris.
4. Test the fogging sensor with a multimeter to verify its functionality.
5. Review the vehicle’s control module for any software updates or faults.

How to fix DTC A670 on BMW step-by-step instructions

To fix DTC A670, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety.
2. Locate the fogging sensor and inspect it for damage.
3. If the sensor is faulty, replace it with a new one.
4. Repair or replace any damaged wiring or connectors.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved.

How to erase DTC A670 on BMW

To erase DTC A670, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to verify that the code has been cleared.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.